Heat Pump Installation in Ellicott City, Lutherville- Timonium, MD And Surrounding Areas
Heat pump installation in Ellicott City, MD and the surrounding areas could prove to be a complicated business. You need a budget-friendly unit, you want to be as energy efficient as possible, protect the environment at the same time, and find a good technician that can do the job perfectly. Of course, we can help you with all that! Here’s what you need to know!
What Types of Heat Pumps Are on the Market?3
- Air-source heat pumps – divided into air-to-air and air-to-water pumps, they can reduce your bills up to 50%
- Ground-source heat pumps – perfectly efficient if you live in a very cold climate.
- Open-loop heat pumps – they need an underground body of water to work and extract the heat or cool temperature from.
- Close-loop heat pumps – similar to the ones above, they need an underground piping system to circulate heat to and from your house.
What Do I Need to Know About a Heat Pump Installation in Ellicott City, MD?
Here are a number of things you need to consider.
Even though most heat pumps will come with five to 10 years of warranty, the rule of thumb is the more you can get, the better. You can, of course, buy additional time yourself.
·The BTU capacity
There’s a simple equation telling you approximately how many BTUs your new heat pump should have. The number of square feet your house has multiplied by 20.
·How much noise it makes
With regards to a heat pump, the noise will always come from the compressor, which is located outside. Try to find one that goes below the 7.6 average.
This means that the heat pump should be able to cool or heat only certain parts of your building or house at a certain time as opposed to all of it at once. This feature will prove crucial in the future because it will allow you to save a lot of money on your bills.
If you have any questions about a heat pump installation in Ellicott City, MD or simply don’t know which system to purchase, please don’t hesitate to give us a call!