Duct Planning and Design In Baltimore, Lutherville-Timonium, Ellicott City, MD and Surrounding Areas
Duct Planning and Design Service in Baltimore, Lutherville-Timonium, Ellicott City, Columbia, Glen Burnie, Bowie, Towson, Dundalk, Catonsville, Laurel, Woodlawn, Nottingham, Randallstown, Abington, Essex, MD and Surrounding Areas.
The Fundamentals of Great Duct Planning and Design
Duct planning and design in Baltimore, Lutherville-Timonium, Ellicott City, MD and the surrounding areas is just one of the many things you need to take into account when renovating your house. But it’s important nonetheless so let’s take an in depth look at it!
Duct Planning and Design Fundamentals
- Think about the type of equipment and supporting systems
There are some kinds of units, such as heat pumps that might need you to install larger ducts. Or, if the system you want has air purifiers that have filters with activated charcoal, you will also need larger ducts as well as more air returns.
- Calculate the load in detail
This becomes especially important if you have more than one room that will need to be heated or cooled differently at the same time. In this scenario, you should calculate the load for each of those rooms and not for the whole house at once.
- What’s the best place to put your unit and ducts?
If you have planned this out properly, than the HVAC unit should have a somewhat centralized position. This will minimize the length of the ducts. Speaking of which, they need to sit in the ceiling and internal walls so that no air will be lost. If possible, avoid installing your ducts in crawl spaces or in the attic so that you don’t waste any conditioned air.
- Find the proper materials
This of course, includes the supports and fittings. It will depend greatly on the budget you have as well as your needs, but even so you should always make sure your technician uses only the top quality ducts.
- Make sure everything is perfectly sealed
If the joints have not been sealed correctly, then up to 20% of the air may be lost in transition. Therefore, you need to use mastic gum or even metal-backed tape as an alternative.
Contact SupTech HVAC Services
If you’re looking for an HVAC company with the expertise and experience to handle your duct planning and design, you’ve definitely come to the right place. All our technicians are at your disposal with one click or just a phone call!